Can a Modified Sine Wave Inverter Damage Electronics?

In This Article
  • How Sine Wave Inverters Work
  • Devices That Can Be Damaged
  • Devices That May Not Work
  • Devices That Typically Work Fine

    If you enjoy camping, having a pure sine wave inverter for your camper is quite useful so you can run your electronics while you are in the wild. Modified sine wave inverters can be found at a great price, but there is always the potential for damage to your electronic devices—which makes it necessary to learn as much as possible before you make your purchase.

    If your electronics don’t fall into either of those two categories, then it's extremely unlikely that a modified sine wave inverter will do any damage. While a pure sine wave inverter is safe for use with a wider range of devices, the greater cost associated with pure sine wave inverters isn't always worth it.

    How Sine Wave Inverters Work

    Both pure and modified sine wave inverters take 12V DC from a battery and turn it into something that approximates the AC power  normally available from the wall outlets in your home or business. AC stands for alternating current, which refers to the fact that AC power periodically changes direction. This can be visualized as a sine wave that gently rises and falls and swaps polarity instantly when it hits zero volts.

    Since producing a modified sine wave is a much simpler process than creating a pure sine wave, modified sine wave inverters are typically much less expensive. The trade-off is that some electronics just don't work correctly or may even be damaged if they aren't powered by a pure sine wave.

    While you’re probably fine using an inexpensively modified sine wave inverter in your camper, there are a few different things that you don’t want to run off a modified sine wave. Anything that uses an AC motor isn’t going to work to full capacity on a modified sine wave. Appliances like refrigerators, microwaves, and compressors that use AC motors won’t run as efficiently on a modified sine wave as they would on a pure sine wave.

    The other main thing to be concerned about with modified sine wave inverters is delicate medical equipment. For instance, if you use a CPAP to help correct apneas when you’re asleep, you’re going to be better off with a pure sine wave inverter. Some CPAP manufacturers warn that you can damage your machine with a modified sine wave inverter, and others specify that the CPAP will work but the humidifier unit could be damaged.

    Other types of medical equipment, such as oxygen concentrators, also need a pure sine wave. In these types of cases, you’re better off using pure sine wave power or looking for a unit that can be powered by DC without the need for an inverter at all  if it's available.

    Some devices suffer from unwanted interference from a modified sine wave inverter. You can power a radio with a modified sine wave inverter, but it may pick up interference from the modified sine wave, which could make it difficult to listen to.

    Other Devices That May Not Work

    Some other electronic devices that may or may not work correctly without a pure sine wave include:

    • Devices that use thyristors like laser printers and photocopiers
    • Devices that use silicon-controlled rectifiers
    • Lighting that makes use of electronic ballasts, like many fluorescent lights

    Devices That Typically Work Fine

    The list of electronics that usually work just fine with a modified sine wave is far too long to get into here. Suffice it to say that if it doesn’t use an AC motor, isn’t a delicate piece of medical equipment, and doesn't fit into any of the other no-go scenarios, you’re probably going to be in the clear.

    If the device that you want to power uses a rectifier to change the AC into DC, it’s extremely unlikely that you’ll have any issues. That means your laptop is probably going to be fine, although some manufacturers claim that not using a pure sine wave inverter will shorten the operational lifespan of the laptop power brick.

    If the device you want to power up runs on DC power in the first place, like a laptop, you're actually better off looking for a way to skip the transition from DC to AC and back to DC. If that seems complicated, it may be easier to think of it in terms of your cell phone.

    When you charge your phone in your car, you don't wire in an inverter and plug in your wall charger. You plug directly into your car's cigarette lighter socket, which is both easier and more efficient. Laptops and many other devices can also be powered directly from a DC power source in exactly this same way with the right adapter.